Label Tapes
GA International Transparent Cryogenic Labels for Thermal-Transfer Printers 0.354" / 9mm Circle Transparent From -196°C to +100°C (-321°F to +212°F)
Transparent thermoplastic cryogenic labels for bio-medical research and clinical laboratories. Withstand long-term storage in deep-freeze and harsh laboratory environments, including liquid and vapor phase liquid nitrogen* (-196°C/-321°F), lab freezers (-80°C/-112°F), and dry ice transportation. Ideal for labeling vials where an unobstructed view of contents is required. Their high temperature and water resistance make these labels perfectly suitable for heated water bath thawing applications. When printed in mirror-image mode, these labels can be applied to the underside of clear plates for easy reading.
GA International Stain-Proof Xylene-Resistant Labels 0.9375" x 0.9375" / 23.8mm x 23.8mm Rectangle White From -80°C to +149°C (-112°F to +300°F)
Thermal-transfer printable labels designed for microscope slides. These highly glossy labels repel stains and do not acquire colors from histological stains, such as hematoxylin or eosin. The labels and printed information are xylene-resistant when used in combination with our XAR-class of solvent-resistant ribbons. The print will resist xylene, toluene, alcohol, MEK, and other solvents and chemicals without needing additional protection. Ideal for histology lab applications.
GA International PikaTAG, Label Applicator for 0.25" & 0.354" Dots, white. (Pack of 3). Contains 3 PIK-2WH applicators and 3 PIKPAD-1. 3 applicator/pack
This is an innovative new label applicator tool that allows you to quickly pick-up small labels from their liner and easily apply them on vial tops, including indented vials caps, or any other surface to be labeled. Easy to handle and use, simply remove the protective cap, use the PikaTAG to “pick” a label, and apply it to the desired surface. Its unique ergonomic design allows for the precise application of pressure at both stages of the labeling process. Each PikaTAG allows the application of upwards of 200 labels (100 per end) when the protective cap is replaced after each use.
GA International Deep-Freeze Labels for Inkjet Printers 2.5" x 0.75" / 63.5mm x 19.1mm Rectangle White From -80°C to +100°C (-112°F to +212°F)
Print eye-catching color logos, graphics, images, and data on our versatile inkjet-printable labels. These freezer-grade labels are designed to identify vials, tubes, plastic bags, freezer boxes, plates, and other containers. Ideal for storage in laboratory freezers (as low as -80°C/-112°F), as well as dry ice transportation, and can withstand exposure to alcohol, xylene, acetone, and other harsh chemicals (spray and incidental contact). Available in roll format, they can be printed with full-color inkjet printers; They can also be written on with ballpoint pens, cryogenic markers, and ink stamped without smudging.
GA International Xylene-Resistant Labels for Paraffin Wax Blocks 1" x 0.5" / 25.4mm x 12.7mm Rectangle White From -55°C to +70°C (-67°F to +158°F)
Thermal-transfer printable thermoplastic labels that adhere strongly to paraffin wax blocks and other hard-to-stick surfaces such as Teflon, Polytetrafluoroethylene (PTFE), Perfluoroalkoxy (PFA), Parchment paper, etc. ParafiTAG™ labels are water- and chemical-resistant, ideal for identifying paraffin wax blocks for histology applications. A chemical-resistant printout is obtained when printed with our XAR-class of solvent-resistant ribbons. The labels and printed information will resist xylene, toluene, alcohol, and other solvents and chemical exposure without additional protection.
GA International Transparent Permanent Cryogenic & Autoclave-Resistant Laser Labels 4" x 0.625" / 101.6mm x 15.9mm Rectangle Transparent From -196°C to +150°C (-321°F to +302°F)
Cryogenic thermoplastic transparent laser labels for long-term storage in liquid nitrogen and deep-freeze harsh environments for biomedical research and clinical laboratories. The labels are also resistant to steam autoclave sterilization and boiling water. These transparent cryo labels accept desktop laser printing and permanent marker. Water-resistant; Wear and tear proof; Do not jam printers; Resistant to UV and gamma irradiation.
GA International Xylene-Resistant Labels for Paraffin Wax Blocks 0.75" x 0.25" / 19.1mm x 6.4mm Rectangle White From -55°C to +70°C (-67°F to +158°F)
Thermal-transfer printable thermoplastic labels that adhere strongly to paraffin wax blocks and other hard-to-stick surfaces such as Teflon, Polytetrafluoroethylene (PTFE), Perfluoroalkoxy (PFA), Parchment paper, etc. ParafiTAG™ labels are water- and chemical-resistant, ideal for identifying paraffin wax blocks for histology applications. A chemical-resistant printout is obtained when printed with our XAR-class of solvent-resistant ribbons. The labels and printed information will resist xylene, toluene, alcohol, and other solvents and chemical exposure without additional protection.
GA International Stain-Proof Xylene-Resistant Labels 0.9375" x 0.9375" / 23.8mm x 23.8mm Rectangle White From -80°C to +149°C (-112°F to +300°F)
Thermal-transfer printable labels designed for microscope slides. These highly glossy labels repel stains and do not acquire colors from histological stains, such as hematoxylin or eosin. The labels and printed information are xylene-resistant when used in combination with our XAR-class of solvent-resistant ribbons. The print will resist xylene, toluene, alcohol, MEK, and other solvents and chemicals without needing additional protection. Ideal for histology lab applications.
Sklar Instruments Sterilization Sklar Microscopy Surgical 1/EA
Sterilization Sklar Microscopy Surgical 1/EA
Sklar Instruments Sterilization Sklar Microscopy Surgical 1/EA
Sterilization Sklar Microscopy Surgical 1/EA
